LevelOne IAT-1000 User Manual
Page 16
4.2.6.
Set the IP Address of an IAT-1000
Right-click the IP Address and click Set Network. The Set Network Dialog
Box pops up.
An IAT-1000 can be set to the DHCP Mode or the Static IP Mode.
An IAT-1000 defaults to the DHCP Mode. After power on, an IAT-1000 attempts
to get an IP address from a DHCP server on the network. If the IAT-1000 cannot
get an IP address, the IAT-1000 assumes the IP address of 192.168.0.100.
If the Static IP Mode is selected, enter the IP Address and the Subnet Mask.