LA STEELCRAFT EC20 - Manual

5" - 14 gauge spun aluminum ball
gold anodized
Single sheave truck, cast aluminum
revolving, non-fouling type
2 Bronze swivel snaps with covers
per halyard
1 Set of halyard: #10 poly
1 - 9" Cast aluminum cleat
Aluminum flash collar
3000 PSI concrete
Hardwood wedges
(supplied by others)
Dry sand tightly tamped
after aligning pole
Foundation sleeve -16 ga
hot dip galvanized steel
Steel centering wedges
1/4" Steel base plate
1/4" Steel support plate
welded to grounding spike
All shafts with overall
length of more than
38'-6" are shipped in
two sections.
Each section matched marked
for field assembly. Exposed
portion of jam sleeve must
be well lubricated prior to
assembly.
1-1/2" maximum shop
gap allowed for field fitting
(ram for tight joint)
Tapered portion: 1
1'-0"
Straight portion: 12'-0"
Project:
Location:
Architect:
Contractor
Customer:
Date:
Revision:
Job:
Overall length: 23'-0"
Foundation: 3'-6"
Cleat height: 5'-0"
Truck Detail
Aluminum body
Stainless steel ball bearings
Aluminum sheave
Cast aluminum spindle
Model EC20
6"
12"
24"
12"
6"
Exposed height: 20'-0"
Ground set tapered aluminum flagpole: ALLOY: 6063T6
Exposed height: 20'-0" Overall height: 23'-0"
Ship in 1 section Butt diameter: 5"
Top diameter: 3" Wall thickness: .188"
Finish: 100 grit polish
3'-0"