Innovative Tools & Technologies Innovative Detailer Cart™ - Manual

Innovative Material-Cart ™
Assembly Instructions
Install Upper Back Frame P/N 730-014 using
1/4" x 2" bolts with corresponding nuts/washers.
Tighten all hardware.
4
5
6
Install Total-Lock Caster Wheels P/N 730-000
into Side Frame P/N 730-011.
Bolt Crosstube P/N 730-012 to Side Frame using
1/4" x 3/4" bolts and washers. Repeat for other side.
(Note: All hardware finger-tight until final step.)
Lay Material Cart flat with Crosstube on floor.
Install top shelf using only 1/4" x 3/4" bolts
and washers. (Note: smaller wire on top
side of shelf.)
1 2
3
Repeat step #3 for middle and bottom shelf. Install
1/4" x 2" bolts with corresponding nuts/washers.
(Note: middle shelf not included if Material Cart was
ordered with Masker Option.)
Install Upper Side Frame P/N 730-013
using 1/4" x 2" bolts with corresponding nuts/washers.
Repeat for opposite side.