Sonnet Technologies Qio MR - Manual (Page 6)

2
1 – Power Indicator LED
This indicator lights when Qio MR is powered, the Internal
Express Bus Extender PCIe card is installed properly in its slot,
and the PCIe cable between the two is plugged in properly
2 – SxS Media Slots
These slots accept both SxS memory cards and ExpressCard/34
adapter cards. Use the included Sonnet multimedia memory
card adapter in these slots to work with Memory Stick, SDXC,
SDHC, SD, MMC, and xD-Picture memory cards
3 – P2 Media Slots
These slots accept P2 memory cards
4 – Eject Buttons for P2 Media Slots
Press these buttons to eject cards from the P2 slots
5 – CF (CompactFlash) Card Slots
These slots accept Type I CF memory cards. Qio MR is not
compatible with Type II (Microdrive, etc.; 5mm thick) CF cards
6 – eSATA Ports
These connect eSATA data cables. Each port supports
individual drives, or up to four SATA hard disk drives (or
SSDs) in chassis with an eSATA interface, and a port multiplier
or hardware RAID controller
7 – PCIe x1 Connector
This connects the included PCIe interface cable. Connect
the other end of the cable to the included Internal PCIe Bus
Extender card in your computer
8 – 12VDC Input Socket
This connects the included power cable
Chapter 2 – Qio MR Chassis Description