PERKO 1029 - Manual

Complete Strike Knob and Handle Regular Bevel Reverse Bevel
Latch Set Plate Assembly With Cam With Cam
0929000CHR
0977000CHR 0995000CHR 0984000CHR 0920000CHR
0929DP0CHR
0968000CHR
0912000CHR 0995000CHR 0984000CHR 0920000CHR
0968DP0CHR
1029000CHR 0977000CHR 0995000CHR 0984000CHR 0920000CHR
1068000CHR 0912000CHR 0995000CHR 0984000CHR 0920000CHR
SPARE PARTS
* These screws are not supplied by PERKO.
** These are PERKO Supplied Screws.
(See Instruction No. 9 to select proper screw length to match door thickness.)
3/05 PERKO, Inc
929INS1 16490 N.W. 13th Avenue
Miami, FL 33169-5707
www.perko.com
Fig. No. 0929 Series Rim Latch Sets Regular Bevel with Box Strike
Fig. No. 0968 Series Rim Latch Sets Regular Bevel with Flush Strike
Fig. No. 1029 Series Rim Latch Sets Reverse Bevel with Box Strike
Fig. No. 1068 Series Rim Latch Sets Reverse Bevel with Flush Strike
INSTALLATION INSTRUCTIONS
Read all instructions before proceeding.
TOOLS REQUIRED: 1/2 inch diameter drill, 5/32 inch diameter drill,
Phillips screwdriver, 1/8 hex key (supplied)
These surface mounted latch sets are designed to be mounted on
the surfaces of doors 1/2 inch to 1 inch thick.
1). Cut out template below. Fold on dotted line. Place template on door at desired height on the
side to have the latch set. The fold tab should overlap the door edge.
2). Mark centers of 1/2 inch and 5/32 inch diameter holes.
3). Drill 1/2 inch and 5/32 inch diameter holes through door.
4). Assemble shaft to “L” handle with set screw.
5). Insert “L” handle shaft through latch set housing assembly.
6). Insert end of “L” handle shaft through 1/2 inch diameter hole in door.
7). Place faceplate on opposite side of door.
8). Place bushing over end of “L” handle shaft. Push body of bushing through large hole in face-
plate.
9). Select screw length based on door thickness. Use short screws for 1/2 inch to 3/4 inch doors
or longer screws for 3/4 inch to I inch doors.
10). Align and fasten latch set housing assembly and faceplate to door with (3) #6-32 oval head
machine screws selected above.
11). Attach knob to “L” handle shaft and tighten set screw.
12). Mount strike plate or box strike to door frame with (2) #6 oval head or flat head wood screws
(not supplied).