AYRE TK-8150 - Manual (Page 19)

Name
Use the right-hand knob to select the desired name. Selecting
“ Unused ” will disable that input and remove it from the list of
available source components when in the normal operating
mode.
A custom name (up to 8 characters) may also be created as
follows:
1) Use the right-hand knob to scroll to the selection “Custom
x”, where “x” represents the selected input number.
2) Press the right-hand button to enter the next menu level.
The current name will be displayed, with the first character
highlighted with a cursor (black characters on a blue
background). The left hand knob selects the cursor position.
3) Use the right-hand knob to select the desired character. The
character set includes A - Z, a - z, 0 - 9, a hyphen, a decimal
point, and a blank. There are three locations for the blank
character, one between each group of characters. These
additional blanks divide the groups of characters and make it
easier to locate a blank character when desired.
4) After creating the desired custom name, press the left-hand
button to back up to the previous level in the setup menu.
Offset
Source components may have varying output levels. In order to
maintain a constant volume level when changing sources, the
Ayre KX-R allows a gain offset to be applied to each input.
The gain offset offers an adjustment from +0 dB to +6 dB in 1
dB increments. Therefore the source components with lower
output levels may be boosted to match the source components
with higher output levels.
19
Unused
CD
Phono
DVD
SACD
SSP
Digital
Tuner
Aux
Tape
D/A
CD-R
DAT
Sat
Cable
Video
TV
VCR
LD
PX-R
CX-R
DX-R
P-5xe
C-5xeMP
DX-5
CX-7eMP
QB-9
D-1xe
Input x
Custom x