Break-in, Batteries, Disc player configuration – AYRE TK-8150 User Manual
Page 16
Batteries
The remote handset uses 4 x AAA batteries. These are accessed
by removing the two screws that hold the black end piece. The
battery holder will slide out, and the batteries may be replaced.
Disc Player Configuration
As shipped from the factory, the remote control handset is
configured to operate the Ayre C-5xe
MP
disc player. The button
with three horizontal lines operates the “Audio” function that
selects between various soundtracks on a DVD disc. Please refer
the C-5xe
MP
owner’s manual for additional details.
The remote handset may also be easily configured to operate
either the Ayre CX-7e
MP
CD player or the Ayre DX-5
Universal A/V Engine, which use different command sets.
Please refer to the chapter “Optimization and Customization”
for details.
Break-In
100 to 500 hours of music played through
the system will ensure full break-in.
Due to the manufacturing processes used for the wires ,
capacitors, and circuit board materials, a break-in period is
necessary for the preamplifier to reach its full sonic potential.
Each input uses a different physical path on the input circuit
board. Therefore a separate break-in period is required for
each input.
16