Andrew ATC200-Lite - Manual (Page 48)

Section 8–Saving Site Report/Configurations ATC200-Lite Teletilt ® Remote Control Downtilt System
8-2 May 2005 Bulletin 639510
Figure 8-2. Selecting the File Format for Word.
1. Assign a filename to the report.
The date, time, and the SiteID of the first
configured actuator are used for the suggested
filename.
3. Click ‘Save’.
Note: All site reports are
saved to
C:\ATC200_Site_Files.
This directory is created
if it does not pre-exist
on the computer.
2. Select the file type.
Files saved in the ‘*.txtrpt’ format can be opened in
Word or any other text editor, such as Notepad or
Wordpad.
2. Assign a filename for the report. The default filename consists of the date, time, and the
site ID of the first actuator (Figure 8-2).
3. Select ‘Text Site Report File (*.txtrpt)’ from the ‘Save as type’ drop down selection, if not
already selected.
4. Click ‘Save’.