IQinVision Alliance Series Flush Mount - Manual (Page 3)

3 Description
IQeye Alliance Series Flush Mount Ceiling Assembly
The Alliance Series Flush Mount Ceiling Assembly allows the IQeye Alliance-pro and
Alliance-mx Dome camera systems to be mounted indoors on drop ceiling or sheet
rock ceiling surfaces.
4 Installation
NOTE: This manual describes how to install the IQeye Alliance Series Flush Mount Ceiling
Assembly and mounting options. Installations should be performed by qualified service personnel
in accordance with local, state and national code(s).
IQeye Alliance Series Flush Mount Ceiling Assembly and Installation
A. Assembling the IQeye Alliance Series Dome Camera to the Flush Mount:
a. Alliance-pro: See the Alliance-pro Installation Manual for instructions on the
removal of the dome cover.
1. Attach the (4) Flat Washers to the (4) Male/Female Hex Standoffs.
2. Attach the (4) Hex Standoffs with Flat Washers to the Ceiling Cam Assembly
(Hex side inside Can Assembly ) as shown in Figure 4.1.
3. Align the Alliance-pro Mounting Plate with the (4) Hex Standoffs, and attach
the plate using the (4) 4mm Pan Head Machine Screws as shown in Figure 4.2.
4. Reattach the Alliance-pro camera to the Mounting Plate (Figure 4.3).
3
Figure 4.1: Looking into Can Assembly Figure 4.2
Figure 4.3