IQinVision IQanalytics - Manual (Page 6)

6
• Object Minimum height: specifies the minimum allowable height of the object
to be detected (in terms of percentage)
• Object Maximum width: specifies the maximum allowable width of the object
to be detected (in terms of percentage)
• Object Maximum height: specifies the maximum allowable height of the
object to be detected (in terms of percentage)
Settings for people, vehicle and other type of objects are similarly setup.
Please note that if more than one type of object is enabled, the entire object (with
sizes within the minimum and maximum set values of height-width) will get
detected.
Also, if object type ‘none’ is enabled, all objects regardless of its height-width will be
detected.
Intrusion Settings
This page contains Intrusion Detector settings.
A. Enable: will enable the Intrusion detection.
B. Brush: This allows the selection of a brush size for area selection painting.
To select an area for Intrusion Detector, click and drag on the image to paint the
scene. The area highlighted in red will be the intrusion area. Click and drag on the
red area to de-select that section of the grid.
Camera Tamper Settings
This notifies you when a camera has been tampered with. It looks for blocking, de-
focusing, power/video loss, light changes and drastic changes in camera angle.