IQinVision IQanalytics - Manual (Page 4)

4
2 Installation
If the IQanalytics Application package is not pre-installed on your camera,
manual installation will be required. Before installation, please ensure the
IQanalytics.iqa application file is available.
1. Connect IQeye camera onto the local network
2. To help detect camera on local network, use IQeye Auto run CD that is provided
with the camera
3. Click “Scan for IQeye cameras on my network” to find IP address of the camera.
4. Type camera IP address into your browser.
5. Go to “setup” tab in camera web UI (if prompted for authentication information,
the default username is “root”, default password is “system”)
6. Go to “security” tab in camera web UI
7. Click on the application package file in “Application File”, select IQanalytics.iqa
and press “upload”. Please don’t switch off or reset camera until uploading and
rebooting is complete.
8. After uploading, the message “IQanalytics: Installed “ in the “Camera
Application” section on “security” page should be displayed.
9. After installation, if application is not licensed, please contact IQeye for license
keys.