7 alliance-mini pendant mount installation – IQinVision Alliance-mini Series IQD5x User Manual
Page 7

7 Alliance-mini Pendant Mount Installation
The Alliance-mini Pendant Mount adapter is designed to easily mount the
camera via a ¾” NPT conduit (not supplied).
1. Pull the PoE Ethernet cable through the top of the Pendant Mount
and attach the Pendant Mount to the conduit by threading the pendant
cover to the conduit as shown in Image 7.1.
2. Pull the PoE Ethernet cable through the cable pass-through in the
camera base plate and connect it to the camera’s Ethernet port.
3. Attach the camera base plate to the Pendant mount using the supplied
quantity. (2) machine screws.
4. Setup the camera as described in steps 3-6 in section 6.
Note: The Alliance-mini Pendant Mount does not provide a weather seal to the camera. The Alliance-
mini in all of its mounting configurations is still an interior camera.
Figure 7.1
7