IQinVision 7 Series - Manual (Page 5)

5
The detected cameras will be displayed in the IQfinder window (Figure 5).
Highlight a camera from the list and click the “Assign IP” button to edit the
selected camera’s IP settings.
Figure 5
3. The “Assign IP” window allows the IP Address, Subnet, and Gateway of the
camera to be changed. It also allows the camera to be configured to DHCP. Click
the “Apply” button after making the desired changes (Figure 6).
NOTE: Changing between a static IP address and DHCP will cause the camera to reboot.
Figure 6
4. To view a camera, double click a camera entry or highlight a camera in the list
and click the “Web Page” button (Figure 7).
Figure 7