IQinVision 7 Series - Manual (Page 2)

2
1 Camera Connection Overview
1. SDHC Card Slot - An SDHC card (not included) can be used for on-camera
recording.
2. Network Connector - RJ-45 Power-over-Ethernet connector.
3. Power Connector - Captive 2-pin screw terminal for 12-24VDC or 24VAC
power source.
4. Analog Video Out - 2.8mm connector with continuous analog video output for
NTSC or PAL video systems. Use analog video cable or adapter IQ76x-AVC
(not included).
5. Reset Button - for Setting the camera back to factory default settings.
6. 1/4 - 20 Mount - Provided on both the top and bottom of the camera for
mounting to a camera mount.
7. Microphone - Built-in mono microphone.
8. Audio/Trigger Connector - For connecting an external microphone,
amplified loudspeakers, alarm trigger input, and outputs to external devices.
9. Product Label - Used to identify the product.