INSTEON Micro On/Off - 2443-222 (US), 2443-422 (EU), 2443-522 (AUS/NZ) Manual - Manual (Page 15)

Page 15 of 21 2443-222/2443-422/2443-522 - Rev: 1/21/2014 8:28 AM
2443-422 (869 MHz) 0x31
2443-522 (921 MHz) 0x32
X10
X10 address 1 optional (comes unassigned)
X10 transmitter Yes
X10 receiver Yes
X10 status response Supported
X10 resume dim Supported (by setting local on-level to zero)
X10 minimum transmit level 3.2 Vpp into 5 Ohms
X10 minimum receive level 20mV into 5 Ohms
X10 messages repeated No
Mechanical
Mounting
Behind switch or outlet, or above light fixture in a single-gang electrical
box
Wires
Sense 1 (yellow wire), 0.205mm
2
/ 24 AWG
Sense 2 (purple wire), 0.205mm
2
/ 24 AWG
Max Cable Size
4mm
2
(2.72mm diameter) / 12 AWG
Min Cable Size
1.5mm
2
/ 15 AWG
Screw Micro connections Line
Load 1
Load 1, second terminal
Neutral
Case Color White
Set button Yes
Plastic UV stabilized ABS+PC
Beeper Yes
LED 1, RGB
Dimensions 46.6mm H x 46.6mm W x 17.5mm D (1.8” H x 1.8” W x 0.7” D)
Weight 71.5g (2.5 oz)
Operating Environment Indoors
Operating Temperature Range 32°F to 104°F (0°C to 40°C)
Operating Humidity Range 0-90% relative humidity
Storage temperature range -4
o
to 158
o
F (-20
o
to 70
o
C)
Electrical
Voltage 100VAC to 240VAC
Frequency 50/60Hz auto detected at power-up
Maximum load
15A – 240VAC (US)
16A – 240VAC (EUR)
10A – 240VAC (AUS/NZ)