INSTEON LED Bulb (PAR38) 2674-222 Manual User Manual

Page 19

Always-On Wiring

Mount the Dimmer Switch into the

junction box with the LED bar on the

left and turn power on to the switch at

the circuit breaker panel.

Test your switch by tapping the paddle

to turn On and Off. Your LED Bulb will

not change but the status lights on the

switch will.

Your switch will now control

your LED Bulb

Unscrew your LED Bulb for a moment

and reinsert. Your LED Bulb will

double-beep.

To link your switch to the LED Bulb,

press and hold the set button until the

device beeps.