INSTEON LED Bulb (PAR38) 2674-222 Manual - Manual (Page 14)

14
Multi-Unlinking or Removing a Scene
2
3
One at a time, unscrew and
reinsert your LED Bulbs. For other
devices, press and hold the set
button until they double-beep.
Tap the set button on your
INSTEON controller to exit Multi-
Unlinking mode.
1
On your INSTEON controller, press
and hold the set button until the
device beeps. Press and hold the
set button again, then tap the set
button.
X
®
®
Your INSTEON controller will no longer
control your INSTEON devices.
A
B
C