INSTEON Hub - 2242-222 (US), 2242-422 (EU), 2242-442 (UK), 2242-522 (AUS/NZ) Manual - Manual (Page 8)

Page 8 of 26 Rev: 9/27/2013 4:17 PM
Hub Set Up
After you have successfully created an account, the mobile application will begin the
installation wizard for the Hub.
If during this process you have any problems please see
Troubleshooting section for
Hub Setup.
Remote Access Setup
If you would like to use your INSTEON Hub when you are away from home so that you can monitor and control your
devices, you will need to configure Remote Access. This involves a process called port forwarding. A guide to
configuring port forwarding can be found under Settings > House > Port Forwarding Guide.
IP Address
The static IP address you’ve assigned
to the Hub. Assigning a static IP
address can be done using your router
or by specifying one here.
Port
The port on which the Hub will listen
for inbound connections. Be sure to
forward this port using your router’s
port forwarding interface.
Remote Access
Guide
Basic instructions to configure the
most popular router brands for port
forwarding.
Call INSTEON Support if you are at all uncomfortable with
configuring Remote Access: 1-866-243-8022
25105