Macros – INSTEON SmartLinc (2412N) Manual User Manual
Page 17
17
®
Rev. 6/19/2012 11:45 AM
Character
X10 House Code
X10 Unit Code
X10 Command
6
A
1
All lights off
E
B
2
Status = off
2
C
3
On
A
D
4
Preset dim level
1
E
5
All lights on
9
F
6
Hail acknowledgement
5
G
7
Brighten
D
H
8
Status = on
7
I
9
Extended code
F
J
10
Status request
3
K
11
Off
B
L
12
Preset dim level
0
M
13
All devices off
8
N
14
Hail request
4
O
15
Dim
C
P
16
Extended data (analog)
Create a macro by stringing many commands together on a single command line to perform several
actions with a single button press. Note that a command line can have a maximum of 44 characters
and you must insert a pause between each scene command and direct command.
Here are some great ways to incorporate macros:
• Activating several SmartLinc scenes at once from a single button press
• Adding X10 devices to an INSTEON scene
• Controlling devices not linked to SmartLinc via direct commands or setting them to different on-
levels
• Creating timers in increments of a second by adding pauses between On and Off commands.
For example, create a “Turn Lights on for 30 Seconds” scene by adding a 30-second pause
(P9P9P9P3) between the On and Off commands.
Macros
1. Log onto http://smartlinc.smarthome.com and
click the Settings icon (wrench).
2. Click Open X10 Controller.
3. Set up your X10 devices:
• Enter the desired House Code.
• Enter the desired Unit Code. X10 address
will be sent (ex. A1).
• Click the desired command. X10 command
will be sent (ex. On).
X10 Control Page