Removing a timer from a smartlinc scene, Setting up smartlinc authentication – INSTEON SmartLinc (2412N) Manual User Manual
Page 13

13
®
Rev. 6/19/2012 11:45 AM
Removing a Timer from a SmartLinc Scene
1. Log onto http://smartlinc.smarthome.com and
select the room and then the scene from which
you want to remove the timer.
• If you don’t recall which rooms or scenes have
timers, click the Room Settings icon (cube with a
wrench) or Scene Settings icon (light bulbs with
a wrench). The rooms or scenes with timers will
be in blue text.
2. Scroll down to On Time, delete the time in the
text field and select “Time.”
3. Scroll down to Off Time, delete the time in the
text field and select “Time.”
4. Click Save and Return.
• Or select “Sunrise” or “Sunset,” which will
automatically sync based on your location (see
Setting Up SmartLinc).
4. Select the days of the week you want the timer
to be active.
5. Click Save and Return.
Setting Up SmartLinc Authentication
1. Log onto http://smartlinc.smarthome.com and
click the Settings icon (wrench).
2. Click Authentication.
3. Enter your username and password
(maximum 10 characters of letters, numbers
and “@” only).
4. Click Saver User Name and Password.
5. Click Home. When the homepage loads, you
will be prompted to enter your new username
and password.
With this feature enabled (it’s disabled by default), every time someone tries to access the SmartLinc
interface he will be prompted for a username and password. We recommend setting your SmartLinc
authentication username and password as the same username/password combo you used when you
registered your SmartLinc for remote access (see Setting Up Web Interface).