Lexibook MFC150GB - Manual (Page 6)

6 7
The lithium battery is intended for use only with this tablet. Do not disassemble the battery. Do not dispose
of the battery in fire or water. To avoid risk of fire, burns or damage to your battery, do not allow a metal
object to touch the battery contacts. Handle a damaged or leaking battery with extreme care. If you come
in contact with the electrolyte, wash the exposed area with soap and water. If it contacts the eye, flush the
eye with water for 15 minutes and seek medical attention. Do not charge the lithium battery pack if the
ambient temperature exceeds 45°C (113°F). To obtain a replacement battery, contact your local dealer.
Do not expose the battery to high storage temperatures (above 60°C, 140°F). When discarding a battery
pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of
batteries. Only use the supplied AC Adaptor for charging.
Specifications
Screen TFT LCD 7 inches
Screen Resolution 800x480 pixels
O.S. Google Android 2.1
CPU 600MHz
Storage 4GB – Micro SD/TransFlash (TF) cards compatible
RAM DDRII 256MB
Wifi 802.11 b/g (built-in)
Audio Built-in Mono speaker
Connectors 1 USB 2.0 port (with mini B connection and type A), 1 Micro
SD card slot, 1 headphone jack
Supported image format JPEG, BMP, GIF
Supported music format MP3
Battery Lithium battery (included) – 4000mAh, 3,7V
Adaptor specifications Input: 100V-240V
Output: 5V 2A
Battery life 4 hrs (average)
Dimensions 195 x 120 x 12 mm
Weight 342g
Languages English – Spanish - French
• The power outlet to which the device is plugged in must be installed near the equipment and must
always be readily accessible.
The battery life may vary based on usage patterns of the device. Do not expose the battery to temperatures
below 0°C (32°F) or above 60° C (140°F). This may adversely affect the battery pack.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent
type recommended by the manufacturer. Discard used batteries according to the manufacturer’s
instructions or local laws.
WARNING: Malfunction or loss of memory may be caused by strong frequency interference or
electrostatic discharge. Should any abnormal function occur, reset the unit or unplug the AC/DC
adaptor from the mains socket and plug it in again.