I-View PTI-100 P.O.S. DVR User Manual

Page 11

starts and specifies the time period of video recording once the sale stops

Clear text over screen when transaction ends: This would clear/clean up the text over the

screen after the specified time period when sale stops.

Setup the printer command code: The DVR is able to process certain functions after

receiving the printer command code, such as recording with the event of opening cash draw.

OK: Click this icon to complete setting.

Fig 2-1.3 Fig 2-1.4

2-2. Setup the configuration of EZNetPOS program

You must install the EZNetPOS.exe program on the POS system/server when you want to use

TCP/IP for the POS text transmission. Follow the instructions below to set your desired

parameter settings.

Step 1. Run the EZNetPOS.exe program and you should see the following image as Fig 2-2.1.