Chapter 3: operation – I-View FDMO-36XIR/27XIR/22XIR/18XIR Outdoor IR Speed Dome Camera User Manual
Page 37

37
Chapter 3: Operation
FastCam III
has four alarm inputs, which can be programmed as N.C. or N.O. When
an alarm signal is received, it can triggers the user-defined action ALARM ACT
(revise, pre001~128) and ALARM OUTPUT can be define as DISABLE,
CONTINUE, 60 SECONDs.
Disable
When alarms triggers, no action will be responds.
Continue
When alarms triggers, FastCam III will keep sending out a signal, till operator turn
off
60 seconds
When alarms triggers, FastCam III will send out signal for 60 seconds.
2.
PASSWORD SETUP
FastCam III features password protection to prevent unauthorized changes to the dome
settings. An operator can open the System Information and Display Setup Screens, but cannot
PASSWORD SETUP
→PASSWORD: DISABLE/ENABLE
PASSWORD: ------------
CONFIRM :--------------
BACK
EXIT
OTHERS
ALARM SETUP
PASSWORD SETUP
TV SYSTEM: NTSC
TEMPERATURE: AUTO
CAMERA BRAND: AUTO
BACK
EXIT