I-View CP-4800DX Hybrid DVR Card User Manual

I-View Hardware

CP-4800DX XP DVR Board Hardware Manual (V1.0)

This section details the installation of CP-4800DX Pro DVR board and how to make the necessary connections.

You may install up to 2 cards into a PC to reach 32 Video and 32 Audio input. The primary one is referred as

CP-4800DX XP 0, the other one will be called CP-4800DX XP 1. Before you start, please make sure that your

PC is off, and the power cable is unplugged.

The DVR system is called CP-9600DX when combine the CP-4800DX XP 0 and XP 1 card onto a

PC together.

The description of CP-4800DX Pro (as Fig 1) pins and sockets:

1: Video input –DB25 pin to connect the D-Sub BNC cable for video input.

2: TV out – RCA connector provide split video output signal.

3&6: Transmit split video signal – Link the (3) socket of CP-4800DX XP 1 into the (6) socket of CP-4800DX

XP 0 DVR board to get 1-16 or 17-32 split video output via RCA Connector (2). (Optional)

4: Video looping- Connect to a video looping board for video loop-out.

5&7: Combine Spilt video signal – Link the (5) socket of CP-4800DX XP 0 into the (7) socket of CP-4800DX

XP 1 DVR board to get 32 split video output via RCA port. (Optional)

8: LED – The indicator of auto reboots function. (CP-4800DX XP 0 only)

9: RESET- System failure socket, connect to the “ Reset “ socket of PC Motherboard. (CP-4800DX XP 0)

10: EM_B – Panic button socket for emergency call. (CP-4800DX XP 0 only)

11: Sensor connector-Connect to the sensor cable of the remote controller. (CP-4800DX XP 0 only)

12: J_USB – Connect to USB cable to the USB port of PC Motherboard.

13: Power connector – Plug power in put from power supply of the PC to provide the power for the DVR card.

(Fig 1)

9 10