Atec Xantrex-XHR Series - Manual (Page 2)

www.ProgrammablePower.com
Common
Switching Frequency 7.5 V to 300 V models: nominal 125 kHz (250 kHz output ripple); 600 V model: nominal 62.5 kHz (125 kHz output ripple)
Time Delay 4 sec maximum from power on until output stable
Voltage Mode Transient Response Time 1 ms for output voltage to recover within 0.5% of its previous level after a step change in load current of up to 50% of rated output
Maximum Voltage Differential ±600 Vdc from output to safety ground
Remote Start/Stop and Interlock 2.5-15 V signal or TTL-compatible input, selectable logic
Remote Analog Programming Voltage and current programming inputs (source must be isolated): 0-5 k, 0-10 k resistances; 0-5 V (default), 0-10 V voltage sources
Remote Analog Monitoring Voltage and current monitor outputs 0-5 V (default), 0-10 V ranges for 0-100% of output
Remote Programming &
Monitoring Accuracy 1% zero to full scale output for the default range
Front Panel Voltage and Current Control 10-turn voltage and current potentiometers
Front Panel Voltage Control Resolution 0.02% of maximum voltage
Main Output Connector 7.5 to 40 V models: nickel-plated copper bus bars;
60 to 600 V models: 4-terminal wire clamp connector for DC output and local sense
Protection Features Over-voltage protection and Over-temperature protection
Approvals CE-marked units meet: EN61010-1, EN61000-6-2 and EN61000-6-4;
CSA C/US certified to UL61010-1B and CSA C22.2 No 1010.1;
Meets USA EMC standard: FCC, part 15B, Class A;
Meets Canadian EMC standard: ICES-001, Class A.
XHR Series : Product Specifications
Environmental
Operating Temperature 0°C to 40°C
Storage Temperature -40°C to 85°C
Humidity Range Up to 80% RH, non-condensing
Physical
Dimensions Width: 8.5” (216 mm)
Height: 3.4” (86.4 mm)
Depth: 18.6” (472.2 mm)
Weight Approximately 14 lbs. ( 6.4 kg )
Input
Voltage Ranges 85-250 VAC, 47-63 Hz, power factor corrected.
Derate maximum output power to 900 W for AC input less than 95 V
Phases
Power Factor 0.99 minimum for full load and 120 Vac input
Current 13 A maximum at 100 Vac;
11 A maximum at 120 Vac;
6 A maximum at 220 Vac
AC Input Connector Type IEC 320 connector
124