Alpha Technologies FXM Communication - Manual (Page 8)

6
FXM Communication Manual
3 Novus User Software (Continued)
UPS MAINTENANCE
These screens let you adjust the UPS to meet your
operating needs. To change any parameter, either
click on the On/Off buttons, or choose an item from a
drop down menu then click on the UPDATE SETTING
button.
Unit Configuration: This lets you set the UPS’s name, input,
output and how often the GUI polls the UPS.
Battery: This lets you set the battery string voltage, charging
parameters, when the low battery warning happens, starts the
battery test and sets when the periodic battery test.
Inverter: This lets you turn the inverter on or off to start or
stop backup battery power to the load.
Relay & Load Shed : This lets you set the front panel’s dry
contact configuration.
Time & Date: This lets you set the UPS’s date and time.
Password: This lets you set the UPS’s password. The factory
set password is 1111.
ALARMS & FAULTS
This read-only screen shows you what malfunctions
the UPS has (See the troubleshooting section of the
UPS manual). When the fault or alarm indicators on the
horizontal bar are lit, place your mouse over the light to
learn what it is. Or click on the light to go straight to this
screen.