IMP Pumps NMTC module - Manual (Page 28)

28
Overview Page:
The Overview page is opened when you enter the NMT web pages. You can monitor the NMT pump on
this page. Current operation parameters, pump temperature, control status and statistics are all
displayed in this section.
On the top right side of the page you can find the Refresh the view option. Using it you can decide
whether to automatically refresh every 3, every 30 seconds or to never refresh the Overview page.
Below, pump parameters are displayed in the following order:
• Operation: Here, various pump operation parameters are shown, which display the current
measured or estimated (calculated) value. Next to the measured/estimated value, the user set
value is displayed in brackets.
• Temperatures: The pumps temperature, measured on its heatsink and the motor status is displayed
here. If the temperature in the motor is too high, HOT will be displayed next to the Motor
parameter and the pump will automatically lower its power. The same will happen if the heatsink
temperature rises over the set limit.
• Statistics: Various pump statistics data are displayed here.
• Control: The status of the digital input control signals, relay status and the twin pump mode status
are all displayed here. The latter tells us if the monitored pump is connected with a second one in
the twin pump mode. The first two parameters are described in a separate manual.
Pump page: