IPX VE-3500 User Manual
Page 54
Change the Application Setting — Alarm Application Enable Setting.
Please follow the steps below to change the setting via the network if necessary.
1. Click
the
Enable Alarm
button on the left side of the record to enter the “Alarm Application
Enable Setting” page.
2.
Check / uncheck the trigger types of “Enable Alarm – Upload Via FTP” (MPEG4 mode only).
3.
Check / uncheck the trigger types of “Enable Alarm – Save Into SD Card”.
4.
Check / uncheck the trigger types of “Enable Alarm – Upload Via SMTP” (MPEG4 mode only).
5.
Enter the "Alarm Duration" you have chosen.
6. Click
the
Submit
button to submit the new setting of the recording.
7. Click
the
Home
button to return to the home page.
Description of function keys:
Enable Alarm – Upload Via FTP:
The alarm recording will be upload to the FTP when triggered.
Enable Alarm – Save Into SD Card:
The alarm recording will be saved to the SD card when
triggered.
Enable Alarm – Upload Via SMTP:
The alarm recording will be upload to the SMTP when
triggered.
Alarm Duration:
Predetermines the length of the alarm.
52