Babyliss G920E Homelight Face & Body - Manual (Page 149)

EN
151
Your facial skin should be shaven, clean and dry with no remnants of a cream or lotion.
Please do not try to remove hair (whether with, for example, an electric epilator or with wax) before using
the Homelight epilator. Epilation (removing hair by its roots) renders pulsed light treatment ineffective.
1. Apply the special precision head designed for the face and sensitive areas:
- Press the On/Standby switch of your Homelight epilator to put it on standby.
- Disconnect the adapter from the mains socket.
- Grip the special body flash on both sides and pull it to remove it from its case.
- Insert the special flash lamp for the face and sensitive areas, urging it gently into place.
2. Press the On/Stand by switch. The luminous power indicator will light up and you will hear the sound of a
fan (like the noise of a hairdryer).
3. About 4 seconds after having pressed the switch the light indicator will show ‘Ready’. The device automatically
defaults to the minimum power setting and is now ready to emit the first pulse.
4. For the face it is strongly advised to set the device to the weakest light intensity: level 1.
5. Please wear protective eye glasses.
6. Ask someone to help you to operate the device by firmly pressing the application surface against your skin
to achieve total contact. As soon as the surface is in full contact with the skin, the message ‘Ready’ on the
light indicator will begin to blink.
7. Press the trigger. The device will now emit a pulse to the skin and the message ‘Ready’ will fade out.
You will see a flash of light and at the same time you will hear a faint « beep » with each pulse. This is normal.
You may also feel a slight sensation of heat and a tingling. Your Homelight epilator immediately recharges itself
between each pulse emission. After 4 seconds, the message ‘Ready’ lights up again on the indicator.
8. Move the application surface away from the area of the skin just treated.
9. Move the application surface to another area to be treated.
Avoid releasing more than one pulse on the same patch of skin!
Do not treat the same area more than once in one session!