AVSL 600.103 CMT01 - Manual (Page 3)

CMT01 User Manual
 Replace the battery as soon as the battery indicator appears. With a
low battery, the meter may produce false readings that can lead to
electric shock and personal injury.
 Remove the connection between the testing leads and the circuit being
tested, and turn the meter power off before opening the meter case.
 The internal circuit of the meter shall not be altered at will to avoid
damage of the meter and any accident.
 A soft cloth and mild detergent should be used to clean the surface of
the tester on a regular basis. No abrasive and solvent should be used
to prevent the surface of the tester from corrosion or damage.
 The tester is suitable for indoor use only.
 Turn the tester power off when it is not in use and take out the battery
when not using for a long time. Check the battery regularly; replace the
battery immediately if any signs of leaking appear. Battery acid will
damage the tester.
General Specifications
Max display: LCD (1999 count) 46 x 15mm
Polarity: Automatic, indicated minus, assumed plus
Measure method: double integral A/D switch implement
Sampling speed: 2 times per second
Over-load indication: “1” is displayed
Operating Environment: 0ºC-40ºC, at <80%RH
Storage Environment: -10ºC-50ºC, at <85%RH
Power: 9Vdc (1 x PP3 battery supplied)
Low battery indication: “ ”
Dimensions: 230 x 68 x 37mm
Weight: 203g