Duro-Last Scuppers - Manual

DATA SHEET
Scuppers
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/12/2012
Description:
Scuppers are designed to be used on rectangular
outlets extending through walls or raised roof edges.
Scuppers are custom prefabricated with one or two
skirts or with a single skirt and metal flange.
Fabricated in 24-gauge vinyl-coated metal with
one or two 40-mil
6” membrane skirts.
Custom configurations, including incorporating
the scupper with a collector box, are available
upon request.
Prefabricated scuppers with a 2” terminating
flange reduce field fabrication and installation
time.
Available in white, tan, gray, and dark gray vinyl-
coated metal.
Contact Duro-Last
®
or EXCEPTIONAL
®
Metals to
request a color chart, samples and information
regarding custom metals and finishes.
Installation:
1. Install in accordance with Duro-Last detail
drawings #2041, #2060, and #2061.
2. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.
Warranty:
Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.
Technical Services:
Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.
Material – Flange Only Gauge Finish
Aluminum .032 Mill or Kynar ®
Stainless Steel 24-gauge N/A
Bonderized Steel 24-gauge N/A
Galvalume 24-gauge Mill or Kynar
®
Copper 16 oz. Mill
Single Skirt Scupper
Double Skirt Scupper
Single Skirt Scupper with Metal Flange