Velleman BTSP1 User Manual

Page 5

BTSP1

Rev. 06

31.01.2011

©Velleman

Connecting/Disconnecting Your Speakerphone
• To connect, select BT speaker from the list on your mobile handset. Next, press

the MF button on the speakerphone and select ACCEPT on your mobile handset.

• To disconnect, power off the speakerphone. Next, select DISCONNECTING to

interrupt the connection between the speakerphone and the mobile handset.

NOTE: when the connection is lost, the speakerphone will automatically power

off after 10 minutes. The blue LED will flash every 3 seconds.

Using Your Speakerphone
• Answering a Call

To answer a call, wait for the speakerphone to ring, then press the MF button
briefly to accept the call or answer the call via the mobile handset.

• Ending a Call

Press the MF button briefly or end the call via the mobile handset.

• Rejecting a Call

To reject a call, wait for the speakerphone to ring, then press and hold the MF

button for 2 seconds until you hear a short beep.

• Voice Dialling

Under standby mode, press the MF button and say the voice tag when you hear

the beep. Make sure to record a voice tag on your mobile handset before using
the function. Functionality varies according to your mobile handset model. Refer

to your mobile handset user guide.

• Re-Dialling the Last Number

Under standby mode, press the MF button twice.

• Adjusting the Volume

Press V+ to increase, press V- to decrease.

• Enabling/Disabling the Mute Function

Press the MODE button shortly to mute the speakerphone; the red LED starts
flashing. Press again to un-mute.

{delete privacy function}

• Call Interchanging

To transfer the call from the speakerphone to the mobile handset during
conversation, press and hold both V+ and V-. Press V+ and V- briefly to transfer
the call back to the speakerphone.

• Hold the call

During a call, press the MF button twice to hold the phone call. Press the MF

button again two times to resume conversation.

• Answering a second call

When receiving a second call, press the MF button once to end the first call and
answer the second call. Press the MF button twice to hold the phone call on the

first line and answer the second line.

• Rejecting a second call

When receiving a second call, press and hold the MF button for ±2 seconds to
reject the call.

• Switching between calls

Press the MF button twice to switch to the other call. Pressing once will end the

first call and returns to the second call.