American Magnetics 4Q06125PS-430 Integrated Power Supply System - Manual (Page 60)

42 Rev. 5
Operation
Setup Menu : Navigation
3.9.2 Menu Navigation
Pressing the MENU key enters the menu structure at the top level. The
display will look approximately as shown below:
The item selector ( ) points to whichever submenu was last used. The left
and right arrows at the ends of the displayed submenu selections indicate
that there are other submenu selections off screen, to the left and/or right
of the submenu selections shown.
The left and right keypad arrows (to the left and right of the MENU key)
move the item selector between the different submenu items. Pressing the
left keypad arrow moves the item selector one item to the left and pressing
the right keypad arrow moves the item selector one item to the right.
When the last item is reached, and the right keypad arrow is pressed, the
item selector will move to the first item. Likewise, when the item selector
is pointing to the first item, and the left keypad arrow is pressed, the item
selector will move to the last item.
Pressing the ENTER key opens the submenu to which the item selector is
pointing when the ENTER key is pressed. See sections 3.10.1 on page 43
through 3.10.5 on page 70 for detailed descriptions of each submenu.
Pressing the ESC key exits a submenu and moves the next higher level
submenu if it exists. If the top level setup menu is being displayed,
pressing the ESC key exits the setup menu.
3.10 Setup Submenu Descriptions
When a submenu is entered by selecting a submenu item and pressing
ENTER (see section 3.9.2 on page 42 for details of menu navigation), the
+0.00 A - Setup Mode (Select one)
+0.50 Vs Supply Load Misc