Acura Embedded AcuBrite 12″-Nav - Manual (Page 6)

AcuBrite 12-Nav Manual
IMPORTANT:
Your Acubrite12-Nav display is only waterproof from the front. To maintain watertight integrity the display
must be flush mounted ensuring that the rear casing is enclosed in a watertight enclosure.
The Acubrite 12-Nav ™ Series Display is designed to be mounted in two configurations:
VESA75 / VESA100 MOUNT
The Acubrite12-Nav Series Display is designed compatible with VESA75 and VESA100 mount. By
installing the monitor with this kit, the user can adjust the viewing angle to improve view ability in changing
environments. This mounting system has proven to be successful in supporting an extreme amount of
weight in high vibration and difficult-mount applications.
The back of the monitor includes mounting points that you can use to mount the monitor as your installation
requires.
Mounting holes on the Acubrite 12-Nav Series Display allow the monitor to be mounted by rear mounted
using VESA75 or VESA100 mount
PANEL (Flush) MOUNT
For installation, there are four tapped mounting holes on the two sides of the unit’s panel. The mounting
hardware packet is included with the product accessories in the shipping box. This packet includes four (4)
stainless steel threaded studs, 3.2 cm and four (4) mounting lock nuts.
Your monitor can be installed using the mounting lock nuts (supplied) in the vertical keyways. Make sure
that both brackets are in the same orientation.
Page 5