Acura Embedded AcuBrite 12″-Nav - Manual (Page 22)

AcuBrite 12-Nav Manual
To use the Split Monitor function, users need to select which controller you want to launch this function, then
check the Multiple Monitors box and Split Monitor at the same time as showing as the follow picture. Press
the [Split Setting] button to set up the activate area.
It shows the current resolution of display and users can set up the activate area by inputting the value by
yourself or use the default button [Upper Half], [Left Half] or [Quarter].The default value of panel resolution
should be full screen as Left: 0, Right: 0, Top: 0 and Bottom: 0.
TouchKit utility provides a fast tool to identify the touch screen orientation when the monitor display was
rotated by 90 degrees. Enable this One Point Calibration feature, Touchtray will pops up this One Point
Calibration tool for users to identify and correct the touch screen / monitor orientation whenever the
monitors was rotated by 90 degrees. Disable this feature , Touchtray does not pop up this One Point
Calibration tool. Then, the user has to do four points calibration to correct the orientation whenever the
monitor was rotated.
About
Information about TouchKit.
Page 21