Acura Embedded AcuBrite 15″-Nav - Manual (Page 6)

AcuBrite 15-Nav Manual
IMPORTANT:
AcuBrite15-Nav display is only waterproof from the front. To maintain watertight integrity the display must
be flush mounted ensuring that the rear casing is enclosed in a watertight enclosure.
AcuBrite15-Nav Display is designed to be mounted in two configurations:
VESA75 / VESA100 MOUNT
Acubrite15-Nav Display is designed compatible with VESA75 and VESA100 mount. By installing the
monitor with this kit, the user can adjust the viewing angle to improve view ability in changing environments.
This mounting system has proven to be successful in supporting an extreme amount of weight in high
vibration and difficult-mount applications.
The back of the monitor includes mounting points that you can use to mount the monitor as your installation
requires.
Mounting holes on AcuBrite15-Nav Display allow the monitor to be mounted by rear mounted using
VESA75 or VESA100 mount
PANEL (Flush) MOUNT
For installation, there are four tapped mounting holes on the two sides of the unit’s panel. The mounting
hardware packet is included with the product accessories in the shipping box. This packet includes four (4)
stainless steel threaded studs, 3.2 cm and four (4) mounting lock nuts.
Your monitor can be installed using the mounting lock nuts (supplied) in the vertical keyways. Make sure
that both brackets are in the same orientation.
Page 5