Acme IA-200 User Manual
Page 8
8
GB
ANTI-CALC SYSTEM
A special resin filter inside the water reservoir softens the water and prevents scale build-up in the
plate. The resin filter is permanent and does not need replacing.
Please note:
Use tap water only. Distilled and demineralised water makes the anti-calc system ineffective by altering
its physicochemical characteristics.
Do not use chemical additives, scented substances or decalcifiers. Failure to comply with the above-
mentioned regulations leads to the loss of guarantee.
ANTI-DRIP SYSTEM
With the anti-drip system, you can perfectly iron even the most delicate fabrics.
Always iron these fabrics at low temperatures. The plate may cool down to the point where no
more steam comes out, but rather drops of boiling water that can leave marks or stains. In these
cases, the Anti-drip system automatically activates to prevent vaporization, so that you can iron
the most delicate fabrics without risk of spoiling or staining them.
AUTOMATIC ShUT OFF (for model IA-200)
The automatic shut off device trips after the iron has been left for approx. eight minutes in the
upright position or unused for approx. thirty seconds in the horizontal position. The green flashing
light and beeps comes on to indicate that shut off has tripped. As soon as you move the iron, this
function turns off and the iron starts working again.