Acme IA-200 - Manual (Page 10)

10
GB
SUGGESTIONS BEFORE USING ThE IRON FOR ThE FIRST TIME
1. Certain parts of the iron have been lightly greased; therefore the iron could give off a little
smoke when plugged in for the first time. This will cease after a short time.
2. Before using the iron for the first time, remove the plastic protector from the soleplate (if
present). Clean the soleplate with a soft cloth.
3. Keep the soleplate very smooth. Do not run it over metal objects (such as against the uncovered
ironing board, buttons, zips etc).
4. Pure wool garments (100% wool) can be ironed with the appliance in the steam position. You
should select preferentially a high steam position and use a dry ironing cloth.
steam ironing
Filling the reservoir
- Check that the plug is disconnected from the socket.
- Move the steam selector (3) to [Fig. 1].
- Open the lid (2).
- Raise the tip of the iron to help the water enter the opening without overflowing.
- Slowly pour the water into the tank and taking care not to go over the maximum level (about
300ml) indicated by “MAX” on the tank [Fig. 2].
- Close the lid (2).