Plantronics Savi Office WO201 - Manual (Page 10)

Plantronics Savi User Guide 10
5 Lifter set-up (optional)
5.1 Installing lifter
5.2 If you do not hear a dial tone
1 If you do not hear a dial tone, raise the lifter height
switch to the next highest position.
1 Firmly press the handset lifter power cord into the
handset lifter jack.
2 While wearing your headset, slide the handset lifter arm
under the handset until the lifter base touches the side
of the phone.
3 Slide the lifter up to where it nearly touches the handset
earpiece.
7 Gently place the lifter on the desk phone in the
pre-determined position.
8 Press firmly to adhere.
2 Repeat Steps 2 to 5 in Section 5.1 as necessary until you
hear a dial tone.
3 When you hear a dial tone, secure the lifter as described
in Steps 6 to 8.
4 Press the call control button on your headset to activate
the lifter.
5 If you hear a dial tone, the lifter is set correctly and
needs no adjustment.
6. Remove the protective strips from the 3 mounting tapes
on the underside of the lifter.
Handset lifter
power cord