Yamaha PSR-540 - Manual (Page 121)

121
119
Footswitch
Various functions can be assigned to the footswitch connected to the FOOT SWITCH
jack. The polarity of the footswitch can also be changed.
• Select the Functions to be controlled by the footswitch.
• Set the polarity of the footswitch NORMAL or REVERSE.
● Functions controlled by the footswitch
Sustain When you press the foot switch,
sustain is applied to the keyboard
notes.
Sostenuto When you press the foot switch,
the sostenuto effect is applied to
the keyboard notes.
Soft When you press the foot switch, the soft effect is applied to the keyboard notes.
Regist + When you press the foot switch, a register with one number higher is recalled.
For example, if you step on the foot switch with bank 1-3 recalled, 1-4 will be
recalled, then next 2-1 will be recalled.
Regist - When you press the foot switch, a register with one number lower is recalled. For
example, if you step on the foot switch with bank 3-2 recalled, 3-1 will be
recalled, then next 2-4 will be recalled.
Start/Stop Pressing the footswitch has the same effect as pressing the START/STOP button
on the panel.
Synchro Stop Pressing the footswitch has the same effect as pressing the SYNC STOP button
on the panel.
Bass Hold The bass root note will be held as long as you press the footswitch.
Break When you press the foot switch, accompaniment will stop. Releasing the switch
with the foot will cause it to play again from the next measure.
Tap Tempo Pressing the footswitch has the same effect as pressing the TAP TEMPO button
on the panel.
● Polarity
This parameter lets you configure the foot switch response of the PSR-540 to
match that of the particular foot switch you are using. If the foot switch works in
the opposite way (i.e., pressing the foot switch has no effect, but releasing it
does), try changing this setting. The default setting is “Norm.”
Other Functions (Utility)
For “Sostenuto,” if you press and hold the foot switch
here, only the first note will be sustained (the note that
you played and held when pressing the foot switch).
For “Sustain,” if you press and hold the foot switch here,
all the notes shown will be sustained.
Type=Sustain
Use the data dial, the [+/YES]
button or the [-/NO] button.
Polarity =Norm
Use the data dial, the [+/YES]
button or the [-/NO] button.
Press the [NEXT] button.
• When using the “Regist +” or
“Regist -” functions with the
fooswitch, make sure to
make the appropriate setting
(“Regist +” or “Regist -”) to all
of the Registrations you
intend to use with the
footswitch.