beautypg.com

Selection search – Yamaha KX W482 User Manual

Page 8

background image

8

s

DECK B

DECK A

MUTE/SEARCH

SELECTION SEARCH - To play back a desired selection by searching for the beginning of the selection

When the

@ tape running indicator is lit:

To search for the next selection
When the

# tape running indicator is lit:

!

MUTE/SEARCH

MUTE/SEARCH

Press
simultaneously.

Press
simultaneously.

+

+

When the

@ tape running indicator is lit:

To search for the beginning of the current selection
When the

# tape running indicator is lit:

!

To search for the selection located before the current selection
÷ Operate the following buttons when the beginning of the current selection is being played.

MUTE/SEARCH

MUTE/SEARCH

Press
simultaneously.

Press
simultaneously.

+

+

When the

# tape running indicator is lit:

When the

@ tape running indicator is lit:

!

MUTE/SEARCH

MUTE/SEARCH

Press
simultaneously.

Press
simultaneously.

+

+

Notes
÷ The blank interval between selections must be at least 4 seconds long.
÷ Selection search may not operate properly with tapes recorded at a low recording level or which have excessive noise.
÷ Use the tape counter to aid in locating a point on a tape (0000 to 9999). To set the counter reading to “0000”, press the

RESET button.

RESET

!

This manual is related to the following products: