Yamaha KX W482 - Manual (Page 18)

18
RESET MEMORY
REMAIN TAPE COUNTER
DUBBING
INTRO SCAN
SEARCH
DECK A/B
DIR A DIR B MONITOR
PLAY
REC/PAUSE STOP REC MUTE
‹ ¤
! ⁄
! ⁄
s
REMOTE
CONTROL
TRANSMITTER
CLEANING OF THE TAPE PATH
Continued high quality performance of your deck is
dependent upon periodic cleaning of the heads, capstan,
pinch roller, and all surfaces over which the tape travels.
Normal use will cause an accumulation of dirt and dust on
the heads, capstans, and pinch rollers. This can lead to
poor sound quality, drop outs (intervals with no sound),
unsteady tape speed, loss of high frequency response, etc.
Thus, clean the heads and all surfaces over which the tape
travels with a commercially available cleaning cassette and
fluid type cleaner.
DEMAGNETIZATION
After 20-30 hours of use, enough residual magnetism will
build up on the heads to cause poor high frequency
reproduction. At this time you should use a commercially
available cassette tape-type head demagnetizer.
÷ When cleaning the tape path or demagnetizing the heads,
be sure to follow carefully the instructions of the
concerning materials such as cleaning fluid or head
demagnetizer.
OPTIONAL REMOTE CONTROL TRANSMITTER
With the optional remote control transmitter RS-KX1, you
can operate this unit at your listening position. For details,
refer to the instruction manual supplied with the remote
control transmitter. REMOTE CONTROL OPERATION RANGE
30° 30°
MAINTENANCE
Capstan Capstan
Pinch roller Pinch roller
Heads
Remote sensor
7 m (23 feet)