Recording compact discs, Recording programmed tracks, Select the disc by pressing the disc skip button – Yamaha CC-70W User Manual
Page 36: Load a tape into the cassette compartment, Set the reverse mode switch to or, Follow steps 3–6 described above, Empty
34
Recording CD(s) on both sides of
a tape automatically
1
Press the CD input selector button and load the disc to be
recorded.
2
Select the disc by pressing the DISC SKIP button.
3
Load a tape into the cassette compartment.
4
When recording with the Dolby NR system, set the Dolby
NR switch to B or C; if not, set it to OFF.
*
For selection of the Dolby B or C position, refer to the
“Dolby B and C Type Noise Reduction” on page 28 or
30.
5
Set the reverse mode switch to
or
.
6
Press the EDIT button. (“EDIT” appears on the display.)
CD playback and recording starts. Recording is carried
out on side A and B of the tape continuously.
*
If the tape has not rewound to the end, it is rewound to
the end rapidly before recording starts.
Recording starts from the first part of the tape on which
recording can be done.
*
“A
” (or “
B”) on the display shows the side of
the tape on which recording is being carried out.
*
When the recording on side A finishes while a track is
being played back, the sound is automatically faded
out, and then the recording stops.
The recording on side B starts from the beginning of
the same track.
Notes
•
If the tape’s total possible recording time is longer than the
total playing time of the selected disc, tracks on another
disc are recorded automatically.
In this case, as many as three discs can be recorded
continuously.
•
During recording, the PLAYXCHANGE button on the CD
player is disabled.
•
The CD player’s repeat play mode (except for the “A REP”
mode) will be canceled during this recording mode. If the
“A REP” repeat play mode is selected, it will not be
canceled, but it will not function until the recording is
finished.
Recording programmed tracks
Programmed tracks from one or more discs can also be
recorded in the same way.
1
1
Program desired tracks from one or more discs. (Refer to
page 18 for the programming procedure.)
2
2
Follow steps 3–6 described above.
To cancel this function
Before recording, press the stop
button of the CD player
or the tape deck.
To stop recording
Press the stop
button of the tape deck.
(At this time, CD playback automatically stops.)
RECORDING COMPACT DISCS
EMPTY
-
+
1
2
3
4
5
1
2
3
4
5
6
7
8
6
7
8
9
0
A
B
C
D
E
TIME
PROG
TAPE
EDIT
+
I0
SEARCH
SKIP
STOP
PLAY/PAUSE
DISC SKIP
RANDOM
REPEAT
CD
TUNER
TAPE
PRESET
A/B/C/D/E
DOWN
UP
PLAY
STOP
PLAY
REC/PAUSE
SLEEP
POWER
DISPLAY
VOLUME
DECK
PHONO/AUX
TUNER DIRECT
A/B
Receiver
CD Player
Tape Deck (KXW-S70)
Tape Deck (KX-S90)
1
1
6
2
6
1
5
4 3
4 5 3