Yamaha CD-S2000 - Manual (Page 9)

9
En
5 VOLTAGE SELECTOR
(Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
the AC power cable into the AC wall outlet.
See page 16 for further information.
6 AC IN
Use this inlet to plug in the supplied power cable.
See page 16 for connection information.
7 Foot
The feet of this unit include built-in spikes. Using the
spikes can reduce the effect of vibrations on the set. When
using the spikes, remove the magnet foot by pulling it.
When using the feet’s built-in spikes, the spikes may scratch the
shelf or floor on which this unit is installed. Use the supports
when placing this unit on expensive furniture, etc.
y
If this unit is unstable, you can adjust the foot height by rotating
it.
AC IN
VOLTAGE
SELECTOR
5 6 7
(Asia and General models)
Caution
Spike
Eng
lish