Basic file operation, Procedure, Select a song, or have a floppy disk ready – Yamaha CLP-970C EN User Manual
Page 51: Access the file menu, Select the desired parameter, Set the parameter or execute the command, Close the file menu, Press the [exit] button, File, Clp-970
CLP-970
51
Saving Recorded Songs and Handling the Files...[FILE]
Basic file operation
A message (information or confirmation dialog) sometimes appears on the screen to facilitate operation.
Refer to the “Message List” on page 92 for an explanation of each message, appropriate actions to take, and
troubleshooting information.
Procedure
1.
Select a song, or have a floppy disk ready.
Select a song you wish to save or rename.
(Optional) Insert a floppy disk for copying or formatting into the disk
drive.
2.
Access the File menu.
Press the [FILE] button.
To close the File menu, press the [EXIT] button once or twice.
3.
Select the desired parameter.
Press the [FILE] or A [–]/[+] buttons repeatedly to display the desired
item from the following:
“SaveToMemory”, “SaveToDisk,” “DeleteSong”, “RenameSong”,
“CopyDisk”, “FormatDisk”, “CharacterCode”.
4.
Set the parameter or execute the command.
Use the B [– (NO)]/[+ (YES)], C [–]/[+], D [–]/[+] buttons.
For more information regarding this procedure, refer to the corre-
sponding section below.
5.
Close the File menu.
Press the [EXIT] button.
DEMO
SONG SELECT
TRANSPOSE
MASTER VOLUME
TEMPO
VOICE
EFFECT
SONG
CLP-970
MIN
MAX
NEW SONG
SONG BALANCE
UP
DOWN
BRILLIANCE
TRACK
1
TRACK
2
EXTRA
TRACKS
FILE
METRONOME
CONTRAST
SONG
SETTING
START/ STOP SETTING
SPLIT
POINT
VOICE
SETTING
REVERB CHORUS
MIDI
SETTING
OTHER
SETTING
REC
PIANO
MAIN
LEFT
E. PIANO/
BASS
HARPSI-
CHORD
MALLET
ORGAN
STRINGS/
CHOIR
STOP
START/
PAUSE
SYNCHRO START
EXIT
PIANO/
E. PIANO
HARPSI/
MALLET
ORGAN/
STRINGS
BASS
A
B
C
D
NO
YES
[FILE]
A
B
C
D
NO
YES