Procedure – Yamaha CLP-970C EN User Manual

Page 33

CLP-970

[REVERB]

This control adds reverberation to the sound by simulating the natural reverberation of a concert hall.

Procedure

You can select a reverb type
via the Reverb Type param-
eter in the “VOICE SET-
TING” menu, and adjust the
reverb depth for the selected
voice via the Reverb Send
parameter. (See page 79.)

Normal setting = ON

Pressing the [REVERB] button repeatedly toggles the reverb
on and off.

Even if the reverb effect is turned off, a “soundboard reverb” effect
will be applied when the GrandPiano1 or GrandPiano2 voice is
selected.

[CHORUS]

This control adds spread and spaciousness to the sound.

Procedure

You can select a chorus type
via the Chorus Type param-
eter in the “VOICE SET-
TING” menu, and adjust the
chorus depth for the
selected voice via the
Reverb Send parameter. You
can also turn chorus on or
off via the Chorus On Off
parameter. (See page 80.)

Normal Setting
The normal chorus on/off
setting is different for each
voice.

Pressing the [CHORUS] button repeatedly toggles the cho-
rus on and off.

You can turn the chorus effect on and off by pressing the [CHORUS]
ON/OFF buttons on the panel and by setting the Chorus On Off
parameter in the VOICE SETTING menu (see page 80). The [CHO-
RUS] ON/OFF button setting on the panel is temporary. That is, if
you select another voice, the chorus setting for the previous voice is
cancelled. The Chorus On Off parameter setting is saved for each
voice. That is, if you select a given voice, the chorus setting is auto-
matically turned on or off according to the saved chorus setting.

TIP