Yamaha CRW4416SX - Manual (Page 11)

Chapter 1 - System Configuration
3
Chapter 1 - System Configuration
Before using the CRW4416SX, make sure that you have all of the items
on the list of included items.
In order to use the CRW4416SX, you will require the following.
Computer
The following operating environment is required:
For an IBM/AT compatible computer
• 100MHz or faster Pentium CPU (in order to write at 4x speed)
• A vacant slot in which to install a SCSI card or a pre-installed SCSI
card
• Windows 95, Windows 98 or Windows NT4.0(Service Pack 3)
• Sufficient hard disk space
Note: If you wish to create an image file and write it to a CD-R or CD-RW,
you will need approximately 750 MB of free space on your hard disk as
work area.
• SCSI card
This is required in order to connect a SCSI device (the Yamaha
CRW4416SX) to your computer.
We recommend the following:
Adaptec SCSI cards: AHA-2940 (PCI), AHA-154x (ISA)
For a Macintosh computer
• A Macintosh computer that is equipped with a Power PC CPU or
Higher
Note: If you wish to create an image file and write it to a CD-R or CD-RW,
you will need approximately 750 MB of free space on your hard disk as
work area.