Yamaha MS2022 - Manual (Page 4)

2
Front Panel
1 POWER Switch & Indicator
Press this switch to power on the MS202 II . Press again to
power off. The power indicator will light up when the power
is on
2 LOW control
Turn this control clockwise to boost low frequencies and
counterclockwise to reduce them.
3 HIGH control
Turn this control clockwise to boost high frequencies and
counterclockwise to reduce them.
4 MASTER Volume
This control can adjust the overall volume level (MIC and
LINE inputs).
5 MIC Volume
This control can adjust the volume level of a microphone
connected to the MIC INPUT jack. If MASTER Volume is
turned all the way down, the mic will not be heard.
6 MIC INPUT
A dynamic type microphone can be connected to this
1/4 inch phone jack.
7 LINE 1, 2 INPUT
Electronic musical instrument such as home keyboard can
be plugged directly into these inputs.
8 LINE OUT
The combined signals from LINE 1, 2, 3 INPUT and MIC
INPUT can be put out from this 1/4” phone jack. You could
connect this LINE OUTPUT to a tape recorder input to be
recorded, or to another powered speaker system for fur-
ther amplification. The output signal level is not affected by
the MASTER Volume level.