Yamaha DVD-C940 - Manual (Page 22)

18
Basic Playback
1 Press STANDBY/ON on the front panel.
2 Press OPEN/CLOSE / on the front panel to
open disc loading tray.
3 Place the chosen discs in the tray, with the label
facing up.
4 Press PLAY B.
➜ The disc tray closes and playback starts
automatically with all the loaded discs on the tray
in sequence.
5 To stop playback, press STOP.
● To playback a specific disc directly, press DISC
SKIP repeatedly on the remote control or one of
the DISC (1, 2, 3, 4, 5) on the front panel.
● Press PLAYXCHANGE on the front panel to
open the disc tray and reload or unload any discs
without interrupting current disc playback.
● Playback will stop after all discs have been played.
● When the disc tray is open, pressing PLAY,
OPEN/CLOSE, PLAYXCHANGE, DISC (1, 2, 3,
4, 5) will close the disc tray automatically.
Notes:
– DVDs may have a region code. Your player will
not play discs that have a region code different from
the region code of your player. The region code of
this player is stated on the rear panel.
– If ‘Child Lock’ is set to ON and the disc inserted
is not authorized, the 4-digit code must be entered
and/or the disc must be authorized (see ‘Access
Control’).
Playing a DVD-Video
● DVD video discs may have one or more TITLES,
and each TITLE may have one or more
CHAPTERS.
● Playback stops at the end of each TITLE.
Playing a title
1 Press DISC (1, 2, 3, 4, 5) on the front panel or
DISC SKIP repeatedly on the remote control to
playback a specific disc directly.
➜ Playback starts automatically.
2 When the MENU appears on the TV screen, use
4, 3, 1, 2 or numerical keys on the remote
control to select an option and continue playback.
3 If the titles are numbered , press the numerical
keys or use 3/4 to select desired title in the
menubar.
4 To stop playback, press STOP.
Resume
The playback of a disc can be interrupted at any
point and then resumed from the point where the
playback was last stopped.
1 Press STOP to interrupt playback.
➜ The help line text appears “Press Stop again to
start from beginning” for 5 seconds.
2 Pressing PLAY will automatically resume playback
from the point where playback was interrupted.
OR
● Press STOP again and then press PLAY,
➜ Playback will starts from the beginning of the
discs.
● If you press PLAY when resume icon appears on
the screen, resume playback starts from the point
where playback was interrupted.
Note:
– Resume feature is also applicable to VCDs and
SVCDs.
STANDBY ON
NATURAL SOUND DVD PLAYER
MULTI CH REPEAT
DISC PLAY CHANGE
2 3 5 4 1
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3
DVD-VIDEO DISC
Operation