XiNCOM Twin WAN XC-DPG402 - Manual (Page 38)

Custom Virtual Servers
This screen allows you to define your own Server types, for situations when the desired Server type
is not listed on the Virtual Servers screen.
Figure 19: Custom Virtual Servers
Settings – Custom Virtual Servers
Select Custom Server
Name Server List
If creating a new entry, ignore this list.
To edit an existing entry, select it, and then click the "Select" button.
The screen will update with data for the selected entry.
Custom Server
Configuration This data defines the Custom Virtual Server:
• Server Name – Enter a suitable name for this server.
• State – Use this to Enable or Disable the server as required.
• Server IP – Enter the IP address of the PC on you LAN which is
running the required Server software.
Each PC should have a fixed IP address, or have a reserved IP
address. (See the Host IP section earlier in this Chapter for details
on reserving an IP address.)
Each PC must be running the appropriate Server software.
• Protocol Type – Select the network protocol used by this sever
type.
• LAN Port Range – Enter the range of port number used for
outgoing traffic from this Server. If only a single port is required,
Page 36